Removing, Installing, and Replacing Components

43

11Insert the drive carrier tabs into the chassis slots, then slip the drive carrier down until the holes in the hard drive carrier align with the holes in the diskette drive carrier.

MAN002B.VSD

12Route the longest ground wire through the white plastic cable-tie.

13Replace the two screws that secure the hard drive carrier to the diskette drive carrier.

Be sure to reattach the ground wire at each screw location. You might need long-nose pliers to reach the ground wire closest to the drive’s power-supply connector.

14Replace the system cover (see “Replacing the System Cover” on page 25).

Page 51
Image 51
Sony PCV-L630 manual Replace the system cover see Replacing the System Cover on