●The Access Point does not have a power switch.

You can use either a straight-through or cross-over Ethernet cable.

●Depending on your provider, you may need to make settings on your computer and with various connection tools. If this is the case, go to Procedure 3 after making the required settings.

Connect the Access Point to a communication device with a router function. If the communication device does not have a router function (such as a cable modem), a separate broadband router is required.

Establishing a wireless connection

Procedure 3 - Establishing a communication session between the computer and the Access Point

The procedure in this guide describes the connection process using the factory default settings.

The factory default settings of the Access Point function are:

●Network Name (SSID) : the 6-character identifier printed on the label inside the rear cover of the Wireless Unit.

●Encryption (WEP) : disabled.

11