Precautions
For regulatory issues or precautions for a safe use, please check the Wireless LAN Regulations Guide.
Power Unit
Use the Power Unit and the power cord supplied with the Access Point. Using a different power unit may result in damage and/or injury.
Safety
Do not drop the Access Point. Careful handling helps to prevent damage.
Installation
Do not place the Access Point where it is exposed to the following conditions:
●Unstable surfaces;
●High humidity or poor ventilation;
●Excessive dust;
●Direct sunlight or extreme heat;
●Closed cars;
●Magnetic fields (near magnets, speakers or televisions);
●Frequent vibration;
●Locations where the transmission of radio waves may be obstructed by metal plates or concrete walls.
Operation
Exposure to rapid changes in temperature or very damp environments can cause condensation on internal parts. This may prevent the Access Point from operating properly.
If this should happen, unplug the power cord from the power outlet and allow the Access Point to dry for two or three hours.
Cleaning
Clean the casing with a soft cloth lightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene. This may damage the finish of the casing.
Emergencies
In case of an emergency, stop the wireless functions by unplugging the power cord.
20