Sony PCWA-A320 Installing the Access Point, Resetting the Access Point to factory defaults, Reset, Reset, Reset

Procedure 6 - Configuring computer settings

Configure the Network Name (SSID) and Encryption (WEP) wireless communication settings on the computer to match those set on the Access Point in Procedure 5. After making the settings of your computer, communication with the Access Point will be enabled.

Refer to the instructions of your Wireless LAN PC Card or Wireless LAN Converter.

Installing the Access Point

Procedure 7 - Installing the Access Point

When configuration is finished, install the Access Point. Its settings are stored so that even when it is turned off, the settings are preserved. The Wireless Unit can be hung to walls.

The settings are now complete.

Resetting the Access Point to factory defaults

1Turn on the Access Point.

2With a paper clip or similar object, press and hold the Reset switch at the bottom of the Wireless Unit for at least one second.

When you press the Reset switch, the indicator on the front of the Wireless Unit lights red and it starts flashing when the switch is pressed for one second.

Quick Setup swich

Reset switch

3When the status indicator starts flashing red, release the Reset switch. The Access Point restarts under the default settings.

15