Power Unit
10 | Connect the supplied power cord here. | |
11 | WIRELESS UNIT | Connect the Wireless Unit cable here. |
| connector |
|
12 | NETWORK connector | Connect the Wireless Unit to your computer or other device using |
|
| an Ethernet cable. |
|
| Use a |
Factory default settings
The factory default settings of the Access Point are:
NAME | DEFAULT SETTING |
Network Name (SSID) | The six characters printed on the label under |
| the rear cover of the Access Point |
| (Wireless Unit) |
Encryption (WEP) | Disabled |
Frequency (Channel) | Auto Select |
Broadcast Network Name (SSID) | Yes |
Access Control | Accept all |
Connection Method | Obtain an IP address automatically (DHCP) |
DNS server | - |
Speed | |
Quick Setup Switch | Enable |
Time Server (NTP Server) | - |
7