Displaying the Access Point setup page
To configure Access Point settings, go to the Access Point setup page. Use one of the following three methods to display the Access Point setup page.
•Display the Access Point setup page using the Wireless Connection Easy Setup Wizard provided on the Wireless LAN PC Card. (page 17)
Note
This method can only be used with Windows Me or Windows 2000.
•Display the Access Point setup page from the Wireless Panel. (page 17)
•Display the Access Point setup page by entering the IP address in the web browser. (page 18)
Note
If your web browser is configured to use a web proxy server, set the browser proxy settings so that the browser does not use a proxy server for the Access Point IP address. (The factory default setting for the Access Point IP address is 192.168.11.1.)
zHints
•The Access Point setup page for configuring Access Point settings is saved in the Access Point internal memory. To display the Access Point setup page, it is not necessary to connect to the Internet.
•When using an Ethernet connection to display the Access Point from your computer, see “Display the Access Point setup page by entering the IP address in the web browser. ” (page 18).
16