Precautions

AC adapter

Use ony the supplied AC adapter. Other AC adapters may cause a failure in the Access Point.

Safety

Do not drop the Access Point. Careful handling will help prevent damage.

Installation

Do not place the Access Point where it will be exposed to the following conditions:

•Unstable surfaces.

•High humidity or poor ventilation.

•Excessive dust.

•Direct sunlight or extreme heat.

•Closed cars.

•Magnetized locations (near magnets, speakers, or televisions).

•Locations exposed to frequent vibration.

•Locations where the transmission of radio waves may be obstructed by metal plates or concrete walls

Operation

Exposure to cold-to-hot temperature extremes or very damp environments may cause moisture to condense on internal parts. This may prevent the Access Point from operating properly.

If this should happen, unplug the AC adapter from the power outlet and let the Access Point sit for two to three hours or until the moisture evaporates.

Cleaning

Clean the casing with a soft cloth, lightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene. This may damage the finish of the casing.

26