Administrator password

If you set an administrator password, you will be requested to enter a user name and password when you open the Access Point setup page.

To open the Access Point setup page, type admin in the dialog box’s User Name text box, then type the password that you set in the Password text box.

Guest password

If you set a guest password, you will be requested to enter a user name and password when you open the Access Point Status page.

Type guest in the User Name text box, then type the password that you set in the Password text box.

Notes

•If no administrator password is set, a guest password cannot be set.

•If the administrator password is cancelled, the guest password is also cancelled.

Configuring and changing settings for the Access Point

There are two types of Access Point settings:

■Easy Setup

For those who are not familiar with networks, it is recommend that you use Easy Setup. However, if the Access Point is connected to an ISDN router or router-type DSL modem, you must make settings in Advanced Setup.

•If you configure settings in Easy Setup, the Access Point operates in NAT router mode.

•When making a PPPoE connection to your ISP using a DSL modem or when using a cable modem, you can normally configure all of the required settings in Easy Setup.

Note

If you configure settings in Easy Setup after you have already configured settings in Advanced Setup, the Advanced Setup settings are lost, and the settings are switched to those in Easy Setup.

connections and Setting

19