Display the Access Point setup page by entering the IP address in the web browser.
1 Connect the Access Point to the AC adapter.
zHint
There is no power switch on the Access Point. Refer to the Quick Start Guide (separate sheet) when connecting the Access Point to the AC adapter.
2 Start up your web browser.
3 Type “http://192.168.11.1/” in the URL entry field, then press Enter.
The Access Point setup page is displayed.
zHints
•The IP address above is the factory default setting for the Access Point. If the IP address has been changed, contact your network administrator.
•When using the NAT Router mode, the Access Point IP address is set to the default gateway for that network.
•When using the Bridge mode, contact your network administrator for the Access Point IP address.
About the Access Point password
You can set two types of Access Point passwords, administrator password and guest password. Neither of these passwords is set when the Access Point is shipped from the factory. Therefore, all users are able to configure Access Point settings and display the status of the Access Point. If you want to restrict the privileges of users, you can set a password as described on the Easy Setup page or the various mode setting pages of Advanced Setup.
Passwords and restrictions on executable functions are as follows.
Password types and ability to use executable functions
Function | Administrator | Guest |
Status display | Possible | Possible |
|
|
|
Easy Setup | Possible | Not possible |
|
|
|
Advanced Setup | Possible | Not possible |
|
|
|
Display Indicator | Possible | Not possible |
|
|
|
Firmware update | Possible | Not possible |
|
|
|
18