Names of parts and functions

Front view

Side view

1

tedstar Getting

POWER

MESSAGE

2WIRELESS

NETWORK 1

NETWORK 2

3

1Built-in antenna (not externally visible)

2Indicators

POWER

Lights green while power is supplied to the Access Point.

MESSAGE

Lights when unread logs exceed a certain size. The indicator goes out when the log is displayed.

WIRELESS

Lights green when data can be exchanged on a wireless LAN. Flashes orange while data is being exchanged on a wireless LAN.

NETWORK 1

Lights green when an Ethernet cable is connected to the NETWORK 1 connector.

Flashes orange while data is being exchanged using the NETWORK 1 connector.

4 5

6

NETWORK 2

Lights green when an Ethernet cable is connected to the NETWORK 2 connector.

Flashes orange while data is being exchanged using the NETWORK 2 connector.

zHint

All indicators except the POWER indicator flash while the Access Point settings are being changed.

3Stand/wall-mount adapter

The stand/wall-mount adapter is retractable and can be used with the arm extended straight down as a stand or with the arm retracted as a wall- mount adapter.

When extending the arm straight down, it must not be fixed in a position other than that shown in the illustration above.

To get the best performance from the built-in antenna, position the Access Point so that the front of the unit creates a right angle with the supporting surface.

9