Sony PEGA-WL110 13US, Tip, Note, Click the, After you perform a hard reset, Windows display on your computer, 4Click [Done] in Install Tool window

4Click [Done] in Install Tool window.

Your computer is ready to install the Wireless LAN utility on your CLIÉ handheld. In the next step, you will perform a HotSync operation to carry out the installation.

5Click the icon in the task tray (Notification area) that is located in the bottom right-hand corner of the

Windows display on your computer.

The [Local USB] check box should be selected in the shortcut menu on the display.

Tip

If you cannot find the icon in the task tray (Notification area) , click [Programs] ([All Programs] in Windows® XP), [Sony Handheld], and then [HotSync Manager] to start up the HotSync manager, from the [Start] menu.

6Execute a local HotSync operation on your CLIÉ handheld.

The Wireless LAN utility is installed on your CLIÉ handheld.

Note

Part of this software application extends into the system of CLIÉ handheld. Therefore, it cannot be uninstalled.

After you perform a hard reset

Make sure you reinstall this utility.

After a hard reset, normally, the backup data on a personal computer is automatically restored to your CLIÉ handheld through a HotSync operation. However, this utility restores only the setting file when a HotSync operation is performed, and it does not restore the utility itself. Therefore, it is necessary to reinstall this utility after a hard reset.