Manuals / Brands / Computer Equipment / Network Card / Sony / Computer Equipment / Network Card

Sony PEGA-WL110 20US, Tip, Advanced Settings, Enter necessary addresses, Setting a network manually, Disabling the power saving mode, Tap [Advanced Setup] in the bottom

1 80

Download 80 pages, 573.57 Kb

Advanced Settings

Setting a network manually

When it is necessary to set a network IP address or DNS address, follow the procedure below.

1Tap [Advanced Setup] in the bottom right-hand corner of the [Wireless LAN Setup] input screen.

2Tap the [Auto] check box in [IP Address] or [DNS Address]. The check mark disappears.

The IP Address input screen or the DNS Address input screen appears.

3

4

Enter necessary addresses.

Tap [OK] when you complete the setting.

Disabling the power saving mode

1Tap [Advanced Setup] in the bottom right-hand corner of the [Wireless LAN Setup] input screen.

2Tap the [Enable] check box in [PowerSaveMode]. The check mark disappears.

The power saving mode is disabled.

Tip

When the communication conditions are not good, you can disable the power saving mode to maximize the battery power and achieve better communications. However, it will make the battery life shorter.

Normally, the power saving mode is recommended.

20US

Contents

Page Owner’s Record For customers in the U.S.A. and Canada : NOTICE FCC WARNING Declaration of Conformity FCC Radiation Exposure Statement: IC Exposure of Humans to RF Fields For customers in Europe: Page Page Performing a HotSync operation Accessing the Internet Notes Wireless LAN Card Front PWR (Power) indicator LNK (Link) indicator Rear 10US 11US 12US 13US 14US 15US 16US 17US 18US 19US 20US 21US 22US 23US 24US 25US 26US 12 Tap V next to [ch] below [Adhoc], and select a channel 13 Tap [Advanced Setup] in the bottom right-handcorner of the screen 14 Tap the [Auto] check box in [IP Address]. The check mark disappears 27US 28US 29US 30US 31US 32US 33US 34US An obstacle may be blocking off radio waves (e.g., metal plate, concrete block the Wireless LAN access point The channel of the Wireless LAN access point is not set from 1ch. to 11ch 36US 37US 38US 39US Pour les clients des Etats-Uniset du Canada : REMARQUE AVERTISSEMENT FCC Déclaration de conformité Déclaration FCC d’exposition aux radiations : Pour les clients en Europe : Page Page Réalisation d’une opération HotSync Accès à Internet Remarques Carte LAN sans fil Avant Témoin d’alimentation (PWR) Témoin d’établissement de liaison (LNK) Arrière 10FR 11FR 12FR 13FR 14FR 15FR 16FR 17FR 18FR 19FR 20FR 21FR 22FR 23FR 24FR 25FR 26FR 27FR 28FR 29FR 30FR 31FR 32FR 33FR 34FR 35FR 36FR 37FR 38FR 39FR