Sony PEGA-WL110 Note, 27US, 12 Tap V next to [ch] below [Adhoc], and select a channel, 13 Tap [Advanced Setup] in the bottom right-handcorner of the screen

12 Tap V next to [ch] below [Adhoc], and select a channel.

Make sure to select the same channel for both your CLIÉ handheld and the other communication device. Select a channel from 1 to 11.

13 Tap [Advanced Setup] in the bottom right-hand corner of the screen.14 Tap the [Auto] check box in [IP Address]. The check mark disappears.

The IP address input screen appears.

Note

Ad-hoc mode may not be established if “Auto” is selected.

Auto IP is only possible when a PC has DHCP and shares an Internet connection. Most of the time, the user has to enter a static IP on the CLIÉ handheld for the Ad-hoc mode.

Continued on next page 27US