Sony PEGA-WL110 32US, Click the, Click the, 5 Click [OK], Preparing your computer, Preparing your CLIÉ handheld, 4Click [TCP/IP Settings], and enter a Subnet Mask

Performing a HotSync Operation via a Network with a Wireless LAN Card

This Wireless LAN card can be used in various ways. For example, you can perform a HotSync operation with a Windows computer via a Wireless LAN. Follow the procedures below.

Preparing your computer

1Click the icon in the Windows task tray (Notification area) in bottom right-hand corner of the taskbar and select [Network] from the shortcut menu.

2Click the icon in the Windows task tray (Notification area) again and select [Setup] from the shortcut menu.

The [Setup] screen is displayed.

3Click the [Network] tab, then click the check box next to the user name for HotSync.

4Click [TCP/IP Settings], and enter a Subnet Mask.

5 Click [OK].

6Connect your CLIÉ handheld to your computer, and perform a local USB HotSync operation.

The computer information is transferred to your CLIÉ handheld. When you perform a HotSync operation via a Wireless LAN, your CLIÉ handheld identifies the computer based on the information transferred.

Preparing your CLIÉ handheld

Follow the steps below to set up your CLIÉ handheld for a HotSync operation via a Wireless LAN.

1Select [Wireless LAN] in [Service] on the [Network] screen of [Preferences], and select a profile name for a HotSync operation on the [Wireless LAN details] screen.

For details, see the Steps 1 to 6 of “Connecting your CLIÉ Handheld to a Wireless LAN” on pages 21 and 22.