Saving and Loading Lens Files
138
Chapter 7 Saving and Loading User Setting Data
Use FILE >Lens (see page129) in the setup menu
to set the data in lens files.
You can set the following data and save it as a
lens file.
See “Basic Setup Menu Operations” (page 94) for
information about menu operations.
To save a lens file to an S×S memory card, insert
the card into a memory card slot and then proceed
as follows.
See “Basic Setup Menu Operations” (page 94) for
information about menu operations.
1Select FILE >Lens in the setup menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step 2.
For details, see “To assign names to files”
(page136).
2Select Lens Store Mem or Lens Store
S×S, and press the MENU knob.
Select Lens Store Mem if you want to save
the data in the camcorder’s internal memory,
and select Lens Store S×S if you want to save
the data on an S×S memory card.
3To execute the save, select [Execute],
and then press the MENU knob.
To cancel the save, select [Cancel], and
then press the MENU knob.
If you select [Execute], a list box of lens file
number appears. File numbers where “No
File” is displayed are empty file numbers.
4Select the file number under which you
want to save the data, and then press the
MENU knob.
A confirmation message appears.
5To execute the save, select [Execute],
and then press the MENU knob.
To cancel the save, select [Cancel], and
then press the MENU knob.
If you selected Lens Store S×S in step 2, the
ACCESS lamp lights when you execute the
save.
When the data has been saved to the S×S
memory card, a completion message appears
and the ACCESS lamp goes out.
To load a lens file from an S×S memory card,
insert the S×S memory card into a memory card
slot, and then proceed as follows.
See “Basic Setup Menu Operations” (page 94) for
information about menu operations.
1Select FILE >Lens in the setup menu.
2Select Lens Recall Mem or Lens Recall
S×S, and press the MENU knob.
Select Lens Recall Mem if you want to load
the file from the camcorder’s internal
memory, and select Lens Recall S×S if you
want to load the file from an S×S memory
card.
3To execute the load, select [Execute],
and then press the MENU knob.
Saving and Loading Lens Files

Setting Lens File Data

Setting data Sub-items
V modulation shading
compensation values
M V Modulation
Center marker position Lens Center H
Lens Center V
Flare level Lens R Flare
Lens G Flare
Lens B Flare
White balance
compensation value
Lens W-R Offset
Lens W-B Offset
White shading
compensation value
L R/G/B H Saw
L R/G/B H Para
L R/G/B V Saw
L R/G/B V Para

Saving Lens Files Loading Lens Files