Viewfinder Screen Display 31
Chapter 1 Overview
• MF* (Manual Focus mode when the MF Assist
function is on)
• Full MF (Full Manual Focus mode)
cExternal device control
“REC2” is displayed when MAINTENANCE
>Camera Config >HD-SDI Remote I/F is set to
[Chara] in the setup menu and a recording control
signal is output from the HD/SD SDI OUT
connector.
dOperation status of connected i.LINK device
The operating format (HDV or DV) and operation
status of that device are indicated as follows.
eVideo level indication
An indication is displayed together with an
appropriate ND filter position number when the
light level of the subject is too high or too low.
fTimecode Caution message
Indicates the elapsed recording/playback time,
timecode, user bits data or other information
selected by the DISPLAY switch (see page 21).
Also indicates a caution message when ca ution is
required such as when you try to change setti ngs.
gBrightness level
Indicates the average brightness level (%) of the
detection area.
hExternal input source
Indicates the type of external input signal (HDV)
to be recorded.
iRecording of external input
Indicates “EXT” when an external input is
recorded.
jElectric color temperature filter
When the electric color temperature filter is set to
ON, the set value of color temperature is
displayed.
kND Filter
Indicates the currently selected ND filter position
number. (see page 16).
lWhite balance memory
Indicates the currently selected white balance
automatic adjustment memory.
ATW: ATW (Aut o Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:P: Preset mode
mGain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN se lector.
nShutter
Indicates the shutter speed or the shutter mode.
For details, see “Setting the Electronic Shutter”
(page55).
oAudio level meters
Indicate the audio levels of channel 1 and channel
2.
pRemaining media capacity
Indicates the recording time remaining for each of
the media loaded in the slots. The available time
for recording with the current video format
(recording bit rate) is calculated according to the
remaining space of each media and indicated in
time units of minutes. A lock icon appears if the
media is write-protected.
qHistogram
Shows a pixel distribution of video luminance
(HD mode only).
rIris position (when the lens is mounted)
Indicates the iris position and the setting for ir is
override (reference value for the lens iris) (see
page57).
The iris override setting is indicated by four
segments indicator as follows.
Indication Meaning
zREC HDV recording in progress
STBY Standby for HDV recording
zREC DV recording in progress
STBY Standby for DV recording
Reference
value
Indicator
+0.25
x
Lower left segment is lit in grey.
+0.5 x
x
Left two segments are lit in grey.
+0.75 x
xx
Left two segments and lower
right segment are lit in grey.