Cueing upTo return to the top of the current clip

Press the PREV button.

•When you press the button in normal or fast- forward playback, the top of the current clip is cued up then playback begins.

•When you press the button in fast-reverse playback or in Pause mode, the top of the current clip is cued up, then the still picture is displayed.

•Repeated pressing of the button cues up the previous clips one by one.

To start playback from the top of the first clip

Press the PREV button and F REV button simultaneously. The top of the first-recorded clip on the memory card is cued up.

To jump to the top of the next clip

Press the NEXT button.

•When you press the button in normal or fast- forward playback, the top of the next clip is cued up then playback begins.

•When you press the button in fast-reverse playback or in Pause mode, the top of the next clip is cued up, then the still picture is displayed.

•Repeated pressing of the button cues up the subsequent clips one by one.

To start playback from the top of the last clip

Press the F FWD button and NEXT button simultaneously. The top of the last-recorded clip on the memory card is cued up.

Monitoring audio

In Normal playback mode, you can monitor the recorded audio signals through the built-in speaker or connected headphones.

Headphone

connector

MONITOR VOL buttons

 

 

MONITOR VOL

HDV

 

Built-in speaker

With the headphones connected to the headphone jack, the built-in speaker is turned off.

Press the MONITOR VOL buttons to adjust the sound volume.

The level bar is displayed during adjustment. You can select audio channel(s) to be monitored with “Audio Output” (page 102) of the AUDIO SET menu.

Adding shot marks during playback

In the same manner as in recording, you can add shot marks to the clip during playback.

At the point where you wish to add a shot mark, press the “Shot Mark1” or “Shot Mark2” assigned button, or the SHOTMARK 1 or 2 button on the IR Remote Commander.

Notes

 

bPlay

• No shot mark can be added if the memory card

is write-protected.

ack

• No shot mark can be added to the first or last

 

frame of a clip.

 

Stopping playback

You can stop playback with either of the following operations:

Press the THUMBNAIL button. Playback mode is canceled, restoring the thumbnail screen.

Press the STOP button.

Playback mode is canceled, showing any external input or a blue screen.

To display the thumbnail screen, press the THUMBNAIL button.

Playing Back Clips 81