Sony PMW-EX1 Limitations of Outputs, YPbPr Out, YPbPr Out, YPbPr Out, YPbPr Out, Select: HD, Select: SD, Select: HD, Select: SD, Clip format, Clip format, Output format

Output formats in clip playback mode (Media mode)

Analog component signals from the COMPONENT OUT connector are output in the format shown below according to the video format of the playback clip and the “YPbPr/SDI Out Select” setting (HD or SD) of the VIDEO SET menu.

The SDI OUT connector outputs serial digital signals of the same format converted from the analog component signals fed from the COMPONENT OUT connector.

Note

No signal is output from the A/V OUT connector when “YPbPr/SDI Out Select” of the VIDEO SET menu is set to “HD” or “SD.”

When the frame rate setting of the video format is 59.94i/59.94P/29.97P/23.98P

Clip format	Output format
	YPbPr Out	YPbPr Out
	Select: HD	Select: SD
1080/59.94i	1080/59.94i	480/59.94i
1080/29.97P	1080/29.97PsF	480/59.94i
1080/23.98P	1080/59.94i	480/59.94i
720/59.94P	720/59.94P	480/59.94i
720/29.97P	720/59.94P	480/59.94i
720/23.98P	720/59.94P	480/59.94i
1080/50i	1080/59.94i1), 2)	480/59.94i1)
1080/25P	1080/29.97PsF1), 2)	480/59.94i1)
720/50P	720/59.94P1), 2)	480/59.94i1)
720/25P	720/59.94P1), 2)	480/59.94i1)

When the frame rate setting of the video format is 50i/50P/25P

Clip format	Output format
	YPbPr Out	YPbPr Out
	Select: HD	Select: SD
1080/59.94i	1080/50i1), 2)	576/50i1)
1080/29.97P	1080/25PsF1), 2)	576/50i1)
1080/23.98P	1080/50i1), 2)	576/50i1)
720/59.94P	720/50P1), 2)	576/50i1)
720/29.97P	720/50P1), 2)	576/50i1)
720/23.98P	720/50P1), 2)	576/50i1)
1080/50i	1080/50i	576/50i
1080/25P	1080/25PsF	576/50i
720/50P	720/50P	576/50i
720/25P	720/50P	576/50i

1)No signal is fed from the SDI OUT connector.

2)The actual frame rate of the output signal is 1/1.001 of the value shown in the table. Some frame may be deleted when converting the frame rate.

Appendixes

1)No signal is fed from the SDI OUT connector.

2)The actual frame rate of the output signal is 1.001 times of the value shown in the table. Some frame may be repeated when converting the frame rate.

Limitations of Outputs

The outputs from the camcorder are limited by the VIDEO SET menu settings as follows. These limitations are common to Camera mode and Media mode.

Menu settings	i.LINK I/O	Enable	Disable	Enable	Disable	Enable	Disable
	YPbPr/SDI Out Select	HD	HD	SD	SD	Off	Off
Outputs from	i.LINK(HDV)	HDV	No signal	HDV	No signal	HDV	No signal
the output
	SDI OUT	No signal	HD	No signal	SD	No signal	No signal
connectors
	COMPONENT OUT	HD	HD	SD	SD	No signal	No signal
	A/V OUT	No signal	No signal	No signal	No signal	SD	SD

118 Formats and Limitations of Outputs