84
Recording to a DVD is not possible.
,The recording destination is HDD only.
The programme position cannot be
changed from the programme position
you are recording.
,Set the TV’s input source to “TV.”
Recording does not start immediately
after you press zREC.
,Operate the recorder only after
“LOADING,” “FORMATTING,” or
“INFO WRITE” disappears from the front
panel display.
Nothing was recorded even though you
set the timer setting correctly.
,There was a power failure during
recording.
,The recorder’s internal clock stopped due
to a power failure that lasted for more than
30 minutes. Reset the clock (page 68).
,The channel was disabled or erased after
the timer recording was set. See “Digital
Channel List” (page 69) and “Analog
Manual Setting” (page 70).
,Disconnect the AC power cord (mains
lead) from the mains, and connect it again.
,The programme contains copy protection
signals (pay-per-view, AVC) that restrict
copying, or a scrambled channel is
selected.
,A programme with parental control
information has been set for recording. If
the display for entering your password
appears before recording starts, enter your
four-digit password using the number
buttons. Your password is required when
you record programmes with an age limit
that exceeds the age limit you set
(page 79).
,Another timer setting overlapped the timer
setting (page 38).
,There is not enough disc space for the
recording.
,The recorder was in the process of
dubbing.
Recording does not stop immediately
after you press xREC STOP.
,It will take a few seconds for the recorder
to input disc data before recording can
stop.
Recording does not stop after you press
x.
,Press xREC STOP.
Timer recording is not complete or did
not start from the beginning.
,There was a power failure during
recording. If the power recovers when
there is a timer recording, the recorder
resumes recording.
Should the power failure continue for more
than 30 minutes, reset the clock (page 68).
,Another timer setting overlapped the timer
setting (page 38).
,Disc space was not sufficient.
Contents previously recorded were
erased.
,Data that is not playable on this recorder
but was recorded on a DVD with a PC will
be erased from the disc when the disc is
inserted.
Editing was not saved on a disc.
,After editing a disc, there was a power
failure or the AC power cord (mains lead)
was disconnected before editing was
saved.
,For DVDs recorded on other DVD
equipment, editing may not be saved
correctly.
Titles cannot be edited.
,Titles cannot be erased or edited while
recording or dubbing.
,Radio titles can only be renamed or erased.
The recorder does not play any type of
disc (except HDD).
,The disc is upside down. Insert the disc
with the labelled side facing up.
,The disc is not correctly inserted.