Sony 3-291-730-21(1), RHT-G1500, RHT-G900 What is “BRAVIA” Sync, 27GB, Preparing for the “BRAVIA” Sync, “BRAVIA” Sync Features, Features Sync “BRAVIA”

“BRAVIA” Sync Features

What is “BRAVIA” Sync?

By connecting Sony components that are compatible with the “BRAVIA” Sync with an HDMI cable (not supplied), operation is simplified as below:

•One-Touch Play: When you play back a component such as a Blu-ray Disc/DVD player (recorder), the stand and the TV are turned on automatically and switch to the appropriate HDMI input.

•System Audio Control: While watching TV, you can select to output the sound from the TV speaker or the speakers of the stand.

•System Power Off: When you turn off the TV, the stand and the connected components are also turned off simultaneously.

“BRAVIA” Sync is compatible with a Sony TV, Blu-ray Disc/DVD player, AV amplifier, etc., with the Control for HDMI function.

CONTROL FOR HDMI is a mutual control function standard used by CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface).

The Control for HDMI function will not operate in the following cases:

•When you connect this stand to a component which is not correspond with Control for HDMI function.

•When you connect the stand and components using other than HDMI connection.

We recommend that you connect this stand to products featuring “BRAVIA” Sync.

Note

•Depending on the connected component, the Control for HDMI function may not work. See the operating instructions of the component.

Preparing for the “BRAVIA” Sync

To use the “BRAVIA” Sync, set the Control for HDMI function to on for the stand and the connected component.

When you connect a Sony TV with the Control for HDMI function, the Control for HDMI function for the stand and the connected component can be set simultaneously by setting Control for HDMI function of the TV.

INPUT SELECTOR

?/1

CENTER SUBWOOFER

DISPLAY	LEVEL
	AMP MENU

AMP

C, X, x, c,

RETURNMENU

PRESET- NIGHT DIMMER PRESET+

TUNING-TUNING+

MUTING

VOLUME SOUND FIELD

1 Make sure that the stand is connected to the TV and the connected components (which should be compatible with the Control for HDMI function) using HDMI cables (not supplied).

2 Turn on the stand, the TV and the connected components.

3 Select the input of the stand connected to the component you want to watch (BD, DVD, SAT), and switch the HDMI input of the TV, so that an image from the connected component is displayed.

continued