4 Set Control for HDMI function of the TV to on.
The Control for HDMI function for the stand and the connected component is simultaneously set to on.
During the setting, “SCANNING” appears in the top panel display. After you finish the setting, “COMPLETE” appears in the top panel display. Wait until the setting is complete.
If “SCANNING” or “COMPLETE” does not appear after performing the steps above
Set the Control for HDMI function to on for the stand and the connected component individually.
1 Press AMP MENU.
2 Press X/x repeatedly until “SET HDMI” appears, then press 
or c.
3 Press X/x repeatedly until “CTRL: HDMI” appears, then press 
or c.
4 Press X/x to select “ON.”
5 Press AMP MENU.
The AMP menu turns off. The Control for HDMI function is set to on.
6 Set the Control for HDMI function of the connected component to on.
For details on setting the connected component, refer to its operating instructions.
7 Select the input of the stand connected to the component you want to use the Control for HDMI function for (BD, DVD, SAT), and repeat step 6.
If you add or reconnect the component
Perform steps of “Preparing for the “BRAVIA” Sync” and “If “SCANNING” or “COMPLETE” does not appear after performing the steps above” again.
Notes
•During the setting of the Control for HDMI function for the stand, the System Audio Control function does not work.
•If the Control for HDMI function for the connected component cannot be set simultaneously by setting “CONTROL FOR HDMI” of the TV, set the Control for HDMI function using the menu of the connected component.
•For details on setting the TV and the connected components, refer to their operating instructions.
•The default setting of the Control for HDMI function of the stand is “OFF.”