Using the Volume Limit function
When the System Audio Control function is active, and the output method changes from the TV speaker to the stand speaker automatically, loud sound may be output depending on the volume level of the stand. You can prevent this by limiting the maximum volume level.
1 Press AMP MENU.
2 Press X/x repeatedly until “SET HDMI” appears, then press 
or c.
3 Press X/x repeatedly until “VOL LIMIT” appears, then press 
or c.
4 Press X/x to select the maximum volume level you want.
The maximum volume level changes as follows:
MAX y 49 y 48 ….. 2 y 1 y MIN
5 Press AMP MENU.
The AMP menu turns off.
Notes
•This function is available only when the Control for HDMI function is set to on.
•This function is not available when the output method changes from the stand speaker to the TV speaker.
Tips
•We recommend that you set the maximum volume level to a little lower than the volume you usually listen to.
•Regardless of the maximum volume level you set, the VOLUME +/– button of the stand and the remote is operable.
•If you do not want to limit the maximum volume level, select “MAX.”
(System Power Off)
When you turn the TV off by using the POWER button on the TV’s remote, the stand and the connected components turns off automatically.
Note
•Depending on the status, the connected components may not be turned off. For details, see operating instructions supplied with the connected components.
Features Sync “BRAVIA”