Sony RXD-700 Setting the Clock, 7 :, 7 :, 7 : O O, Connecting the mains lead, Before using the CD Receiver for the first time

Getting Started

The arrow •indicates signal flow.

CD Receiver	Tape deck
TAPE	OUTPUT	INPUT
REC OUT LINE IN
	LINE	LINE
L	L ‚	L
R	R	R

•

The audio signal of the currently selected source (CD or tuner) is output through the TAPE OUT jacks.

Connecting the mains lead

Connect the mains lead to a wall outlet.

Note

Separate the mains lead, audio cords and speaker cords. Noise or sound deterioration may occur when audio cords are in contact with the mains lead, or when the mains lead or speaker cords are placed near a loop aerial or aerial wire.

Before using the CD Receiver for the first time

You need to reset the CD Receiver.

PRESET – TAPE

While the power is off, press TAPE while holding down PRESET –.

“All Clear” appears in the display.

Note

When you reset the CD Receiver, all the preset radio stations are erased.

Setting the Clock

You must set the time before using the timer functions.

CLOCK SET TIMER +/– ENTER

1Press CLOCK SET.

The hour indication flashes.

-- : - -

2Press TIMER +/– to set the hour. The clock uses the 24-hour system.

7 : - -

3Press ENTER.

The minute indication flashes.

7 : - -

4Press TIMER +/– to set the minute.

7 : O O

5Press ENTER. The clock starts.

To adjust the clock after you have set it

Press CLOCK SET and hold down until the hour indication of the clock starts flashing (about one second), then adjust the clock following the above procedure.

6EN