Sony SAT-B65A, SAT-A65A manual Telephone Jack

Attach the antenna cable You can configure your system several ways, depending on what additional components (such as a VCR, DVD player, or A/V receiver) you select. For now, however, use the simplest configuration to check your antenna and cabling.

•Ensure that the DIRECTV® Receiver is not plugged into an electrical outlet.

•Attach the RG-6 coaxial antenna cable to the SATELLITE IN connector on the back of the DIRECTV Receiver. Refer to the appropriate figure below.

1

2

VHF/UHF IN

VHF (SAT)

/UHF OUT

3 4 5 6

7

Model: SAT-B65

Digital Satellite Receiver

TEL LINESony Electronics, Inc.

Made in Mexico

8 9

Table 1: Rear panel connections - SAT-B65A DIRECTV Receiver

1	SATELLITE IN connector	6	VIDEO OUTPUT jack
2	VHF/UHF IN connector	7	S-VIDEO jack
3	VHF (SAT)/UHF OUT connector	8	TELEPHONE JACK
4	AUDIO OUTPUT (R) jack	9	AC POWER CORD

5AUDIO OUTPUT (L) jack

6

8 10 12 14

VHF/UHF IN

1

2 3 4

VHF (SAT)

/UHF OUT

5

7 9 11 13

Model: SAT-A65

Digital Satellite Receiver

TEL LINESony Electronics, Inc.

Made in Mexico

15 16

Table 2: Rear panel connections - SAT-A65A DIRECTV Receiver

1	SATELLITE IN connector	9	AUDIO OUTPUT (L) jack
2	RF REMOTE antenna jack	10	AUDIO OUTPUT (L) jack
3	DATA PORT	11	VIDEO OUTPUT jack
4	DIGITAL AUDIO OUTPUT optical jack	12	VIDEO OUTPUT jack
5	VHF (SAT)/UHF OUT connector	13	S-VIDEO jack
6	VHF/UHF IN connector	14	VCR CONTROL cable jack
7	AUDIO OUTPUT (R) jack	15	TELEPHONE JACK
8	AUDIO OUTPUT (R) jack	16	AC POWER CORD

2 Getting started