4. To dial the number,press or .(When dialing a
number with a hard pause,press to send the next set of
numbers.)
– or –
To save the number in your Contacts,press Options(right
softkey)> Save Phone#.
Dialing From the Contacts List
1. From standby mode,select Contacts (right softkey).
2. Select the entry you want to call and press .
3. Highlight the number you wish to call and press or .
Note:The icon next to each entry represents the labels (for example,
Mobile, Home, Work, etc.) of the entry’s default phone number. A triangle
next to the icon means there are other phone numbers for the entry.
Press the navigation key right or left to select other number.
Using Speed Dialing
With this feature,you can dial your favourite entries using one
key press for locations 2-9.(See “Assigning Speed Dial Numbers”
on page 63.)
To use speed dial:
From standby mode,press and hold the appropriate key for
approximately two seconds.
– or –
From standby mode,press the appropriate key and press
or .
The display confirms that the number has been dialed when it
shows “Connecting...”.
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing.You can use
either of the following abbreviated dialing features.
Ph. Book Matchto retrieve any desired number saved in your
Contacts by entering only the last three to six digits of the
number.This feature becomes available when you enable
Abbreviated Dialing feature.(See “Setting Abbreviated
Dialing”on page 48.)
2.The Basics 25