Notes on the playback of DTS audio from a DVD video

DTS audio signal can only be output through an optical digital cable (sold separately). Please note that it cannot be output through a regular audio cable.

• Do not set the “DTS” option of “Audio Digital Out” under “Audio Setup”

to “On” when using an audio component that does not have a built-in

 

DTS decoder. In such cases, if you play a DTS audio track, a loud noise

US

(or no sound) will come from the speakers, possibly hurting your ears or

 

damaging the speakers.

 

•When the “DTS” option of “Audio Digital Out” under “Audio Setup” is set to “Off,” the DVD’s DTS audio output will not be played back, even if you connect with an optical digital cable.

zWhen the DVD video is finished1Press the A (open) button on the PlayStation®2 console.2 Remove the disc.3 Press the A button.4 Press and hold the 1 (standby)/RESET button for about two seconds.

Note

To save your changes, be sure to eject the DVD before pressing the 1/RESET button or turning off the console with the MAIN POWER switch. Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD.

zOperating the DVD Player

The DVD Player can be operated in the following three ways:

•through the on-screen Control Panel

•directly with the DVD remote control

•directly with the analog controller (DUALSHOCK®2).

Notes

•Depending on the disc used, some operations may vary or may not be possible.

•The method of operation for certain functions may vary depending on whether the IR receiver unit is inserted into the PlayStation®2 console or not.

17