2Start the supplied DVD Player disc (see page 14 for instructions).3On the startup screen, press the ✕ (enter) button.

The Basic Operations screen is displayed.

4With the Basic Operations screen displayed, press the ✕ button.

The Menu screen is displayed.

5 Select the “Installing DVD Player” option from the Menu screen US and press the ✕ button.

Complete the installation following the on-screen instructions.

Notes

•To view DVD video using the DVD Player installed on a memory card (8MB) (for PlayStation®2), you must insert the memory card (8MB) (for PlayStation®2) into a MEMORY CARD slot of the PlayStation®2 console.

•Some DVD remote control functions will not work if you use DVD Player software earlier than version 2.00. Refer to the PlayStation®2 console instruction manual for details on how to check the version of your DVD Player software.

For PlayStation®2 consoles of model numbers SCPH-30001 and SCPH-35001 GT, you must install DVD Player (ver 2.00), or later, on a memory card (8MB) (for PlayStation®2) to activate all DVD remote control functions.

•Before installing the DVD Player on the memory card (8MB) (for

PlayStation®2), be sure that at least 2,200KB (2.2MB) of free space is available on the memory card.

•Insert the memory card (8MB) (for PlayStation®2) into MEMORY CARD

slot 1 of the PlayStation®2 console. Installation is not possible with the memory card in MEMORY CARD slot 2.

•Do not remove the memory card (8MB) (for PlayStation®2) while the installation is in progress. The installation will be incomplete if the memory card is removed or the PlayStation®2 console is turned off or reset while installing.

15