Sony SCPH-10171, SCPH-97042 Viewing a DVD video (continued), zPlayback from the last stopping point (Resume Play), Using the Control Panel, During playback, press the

Viewing a DVD video (continued)

zPlayback from the last stopping point (Resume Play)

1During playback, press the x STOP or a button on the DVD remote control to stop play.

The message, “Press [Play] to resume viewing. To start from the beginning, press [Stop] and then [Play].” will appear on the screen.

2Press the H PLAY button on the DVD remote control.

Playback begins from the point in step 1 where it was stopped.

Using the Control Panel

x

N

1During playback, use the directional buttons to move to the x (Stop) icon of the Control Panel and press the ✕ button to stop playback.

2Select the N (Play) icon and press the ✕ button.

Playback begins from the point in step 1 where it was stopped.

Notes

•To play the disc from the beginning, press x one more time after stopping playback, then press H.

•Resume Play may not be available on some DVD discs.

•Depending on where you stopped the disc, the console may resume play from a slightly different point.

•The recording of the point where playback was stopped is cleared when:

–you open the disc tray

–you shift to standby mode by pressing and holding down the 1 (standby)/ RESET button

–you turn the power off using the MAIN POWER switch on the console rear

–you start playback after selecting a title or chapter.

26