zSetting sound options (Audio Setup)

“Audio Setup” allows you to adjust your audio settings according to the playback conditions. The default settings are underlined.

Select the (Audio Setup) icon in the Setup display.

To save your changes, be sure to eject the DVD before pressing the

US

 

1 (standby)/RESET button or turning off the console with the MAIN

 

POWER switch. Please note that changes will not be saved if you reset or

 

turn off the console without first ejecting the DVD.

 

x Audio Digital Out

Switches the method of outputting audio signals when you connect the following equipment to the DIGITAL OUT (OPTICAL) connector using an optical digital cable (sold separately):

•a receiver (amplifier) with a digital connector

•an audio component with a built-in Dolby Digital or DTS decoder

•an MD (MiniDisc) or DAT (Digital Audio Tape) deck

For details on connection, refer to the PlayStation®2 console instruction manual.

•DIGITAL OUT (OPTICAL)

Selects whether to output signal via the DIGITAL OUT (OPTICAL) connector.

–On : Select this when you connect with an optical digital cable (sold separately). Normally select this option. If you select “On,” select the appropriate settings for “Dolby Digital” and “DTS.”

–Off : Select this when you do not want sound (audio) signal to be output via the DIGITAL OUT (OPTICAL) connector.

Note

When “Off” is selected, neither “Dolby Digital” nor “DTS” can be set.

51