Sony SDM-N50PS Adjusting the contrast (CONTRAST), Adjusting the black level of an image (BRIGHTNESS), xUsing the MENU, M(+)/m(–),and OK buttons, xResetting the adjustments

xUsing the MENU, M(+)/m(–), and OK buttons

1Display the main menu.

Press the MENU button to display the main menu on your screen.

MENU

2Select the menu you want to adjust.

Press the M(+)/m(–) buttons to display the desired menu. Press the OK button to select the menu item.

INPUT

, 12

OK

3Adjust the menu.

Press the M(+)/m(–) buttons to make the adjustment. Then press the OK button to return to the previous menu.

INPUT

, 12

OK

4Close the menu.

Press the MENU button once to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.

MENU

xResetting the adjustments

You can reset the adjustments using the RESET menu. See page 16 for more information on resetting the adjustments.

Adjusting the contrast (CONTRAST)

Contrast adjustment is made using a separate CONTRAST menu from the main menu (page 12). This setting is stored in memory for the signal from the currently selected input connector.

1Press the 6 (contrast) button.

The CONTRAST menu appears on the screen.

CONTRAS T

7 0

4 8 . 4 k H z / 6 0 H z

Horizontal frequency	Vertical frequency of
of the current input	the current input
signal	signal

Displaying the current input signal

The horizontal and vertical frequencies of the current input signal are displayed in the CONTRAST and BRIGHTNESS menu.

2Press the M(+)/m(–) buttons to adjust the contrast.

The menu automatically disappears after about 3 seconds.

GB

Adjusting the black level of an image (BRIGHTNESS)

Brightness adjustment is made using a separate BRIGHTNESS menu from the main menu (page 12). This setting is stored in memory for the signal from the currently selected input connector.

1Press the 8 (brightness) button.

The BRIGHTNESS menu appears on the screen.

BR I GHTNESS

5 0

4 8 . 4 k H z / 6 0 H z

Horizontal frequency	Vertical frequency of
of the current input	the current input
signal	signal

2Press the M(+)/m(–) buttons to adjust the brightness.

The menu automatically disappears after about 3 seconds.

If the screen is too bright

Adjust the backlight. For more information about adjusting the backlight see “Adjusting the backlight” on page 16.

Note

You can adjust neither contrast nor brightness when displaying the main menu on the screen.

13