Installing the display vertically

This display can be installed either horizontally or vertically using the supplied display stand.

To switch to the horizontal or vertical viewing position

First install the supplied WinPortrait (for Windws 95/98 and NT4.0) or MacPortrait (for Macintosh). To switch the view, press Shift + Ctrl + R on the keyboard. For more information, see the supplied software’s instruction manual.

To install the display horizontally or vertically

Open the display stand until the click sound is heard.

Put the display on the stand, aligning the mark which shows the stand position on the display.

Horizontal installation

The stand positioning mark

Vertical installation

The stand positioning mark

To close the display stand

While sliding the stopper up, close the display stand.

The stopper

Using the headphones

You can listen to the audio signals from your computer or other audio equipment using headphones.

Connect the AUDIO IN jack to the audio output jack of your computer or other audio equipment using the supplied audio cord.

Adjusting the volume1Press the 2 +/– buttons.

The VOLUME menu appears on the screen.

VOL UME

,

4 0

2Press the 2 +/– button to adjust the volume.

The menu automatically disappears after about 3 seconds.

Notes

•You cannot adjust the volume when displaying the main menu on the screen.

•When your monitor is in power saving mode, no sound comes from the headphones.

10