Resetting the adjustments (RESET)

You can reset the adjustments.

1Press the MENU button.

The main menu appears on the screen.

2Press the M(+)/m(–) buttons to select 0 (RESET) and press the OK button.

The RESET menu appears on the screen.

You can reset the adjustment data in either of the following two ways:

Resetting the adjustment data most appropriately for the current input signalPress the M(+)/m(–) buttons to select SCREEN RESET and press the OK button.

The automatic picture quality adjustment function of this monitor automatically adjusts the phase, pitch, and picture position, to the most appropriate value. If this function is activated, the phase is automatically adjusted whenever the monitor receives the same input signal.

The RESET menu is automatically returned to the main menu after the adjustment data is reset.

Resetting all of the adjustment data for all input signalsPress the M(+)/m(–) buttons to select ALL RESET and press the OK button.

The RESET menu is automatically returned to the main menu after the adjustment data is reset.

To cancel resettingPress the M(+)/m(–) buttons to select and press theOK button.

The RESET menu returns to the main menu without resetting the adjustment data.

Additional settings (Option)

You can adjust the following options:

•BASS BOOST

•BACKLIGHT

•POWER SAVE

•LANGUAGE

•MENU LOCK

1Press the MENU button.

The main menu appears on the screen.

2Press the M(+)/m(–) buttons to select m.

The option menu appears on the screen.

3Press the M(+)/m(–) buttons to select the desired option item and press the OK button.

Adjust the selected option item according to the following instructions.

Boosting the bass (bass boost function)

This option increases the bass output.

First press the M(+)/m(–) buttons to select (BASS

BOOST) and press the OK button. Then press the M(+)/m(–) buttons to select either ON or OFF.

Adjusting the backlight

If the screen is too bright, adjust the backlight.

First press the M(+)/m(–) buttons to select (BACKLIGHT) and press the OK button. Then press

the M(+)/m(–) buttons to adjust the desired light level.Setting up the power saving mode

This monitor has a function which enables it to enter the power save mode automatically according to the power saving settings of the computer. You can prevent the monitor from entering the power saving mode by setting the following option to OFF.

First press the M(+)/m(–) buttons to select ZZ... (POWER

SAVE) and press the OK button. Then press the M(+)/m(–) buttons to select either ON or OFF.

Selecting the on-screen menu language

See “Selecting the on-screen menu language (LANGUAGE)” on page 11.

Locking the menus and controls (the menu lock function)

You can protect adjustment data by locking the menus and controls.

First press the M(+)/m(–) buttons to select (MENULOCK) and press the OK button. Then press the M(+)/m(–) buttons and select ON.

Only the power switch, and (MENU LOCK) of the option

menu will operate. If any other items are selected, the mark appears on the screen.

To cancel the menu lock function

Repeat the procedure above and set and (MENU LOCK) to OFF.

16