To install the display horizontally or vertically

This display can be installed either horizontally or vertically using the supplied display stand.

Open the display stand until the click sound is heard.

Put the display on the stand, aligning the mark which shows the stand position on the display.

To switch to the horizontal or vertical viewing position, see page 10.

Horizontal installation

The stand positioning mark

Vertical installation

The stand positioning mark

To close the display stand

While sliding the stopper up, close the display stand.

The stopper

To adjust the angle

This display can be adjusted within the angles shown below with the supplied display stand.

To adjust the angle, hold the front base and push (or pull) the rear leg outward (or inward) until the desired angle is attained.

To install the display on the display stand, put it softly.

40°

20°

Note

Do not exceed the angles shown above, otherwise the display could fall and cause damage or a malfunction.

To use the display comfortably

This display is designed so that you can set it up at a comfortable

viewing angle. Adjust the viewing angle of your displayGB according to the height of the desk and chair, and so that light is

not reflected from the screen to your eyes.

5