Setup

Before using your monitor, check that the following accessories are included in your carton:

•LCD display

•Media engine

•Display stand

•Media engine stand

•Power cord

•System connecting cable (2 m) (applicable cable type: DP-2)

•HD15 (RGB) video signal cable

•Audio cord (stereo miniplug)

•Macintosh adapter

•Windows Monitor Information Disk/Utility Disk

•Macintosh Utility Disk

•Software for use when installing the display vertically (WinPortrait/MacPortrait)

•Warranty card

•Notes for Macintosh users

•This instruction manual

Step 1: Connect the media engine to your computer

Turn off the media engine and computer before connecting.

Note

Do not touch the pins of the video signal cable connector as this might bend the pins.

xConnecting to an IBM PC/AT or compatible computer

to INPUT1 or INPUT2 connector

 

to video output

 

HD15 (RGB) video

IBM PC/AT or

signal cable (supplied)

compatible computer

 

xConnecting to a Macintosh or compatible computer

Use the supplied Macintosh adapter.

to INPUT1 or INPUT2 connector

Macintosh adapter (supplied)*

to video output

HD15 (RGB) video

signal cable (supplied)

 

Macintosh or compatible computer

* Refer to the supplied “Notes for Macintosh users” for further details.

Step 2: Connect the display and media engine

Turn off the display and media engine before connecting.

to SYSTEM

to SYSTEM

CONNECTOR of

CONNECTOR

the display

of the media

 

engine

 

system connecting

 

cable (2 m) (supplied)

Caution

Be sure to install the media engine vertically shown as above. Installing the media engine lying flat may block ventilation, and may cause a malfunction.

Note

Grasp the plug when connecting the cable.

8