Setup 6:Adjusting the height and tilt

This display can be adjusted within the angles shown below.

Hold both sides of the LCD panel, then adjust screen angles.

approx. approx.

5° 30°

approx.

60 mm (2 3/8

inches)

Selecting the input signal

(INPUT button) (SDM-S74E only)

Press the m/M buttons.

The input signal change each time you press these buttons.

INPUT

On-screen message

Input signal configuration

(Appears about 5 seconds on

 

the upper left corner.)

 

INPUT1 : DVI-D

DVI-D input connector

 

(digital RGB) for INPUT1

INPUT2 : HD15

HD15 input connector

 

(analog RGB) for INPUT2

To use the monitor comfortably

Adjust the viewing angle of your monitor according to the height of your desk and chair, so that light is not reflected from the screen to your eyes.

Note

When adjusting the screen height and tilt, proceed slowly and carefully, making sure not to hit the monitor against the desk.

10