Sony SDM-S73E, SDM-S74E (PHASE/PITCH), xAdjust the picture’s sharpness manually, xAutomatic picture quality adjustment function

Adjusting the picture’s sharpness and centering (SCREEN) (SDM-S73E/S74E analog RGB signal only)

Note

When receiving digital RGB signals from the DVI-D input connector, adjustment is not necessary.

xAutomatic picture quality adjustment function

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 17).

Note

While the automatic picture quality adjustment function is activated, only the 1 (power) switch is operable.

If the automatic picture quality adjustment function of this monitor did not seem to adjust the picture completely

You can make further automatic adjustment of the picture quality for the current input signal. (See AUTO below.)

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the display receives the same input signal. These settings may have to be repeated if you change the input signal after reconnecting your computer.

xMake further automatic adjustments to the picture quality for the current input signal (AUTO)

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

3Press the m/M buttons to select AUTO and press the

OK button.

Make the appropriate adjustments of the screen’s phase, pitch and horizontal/vertical position for the current input signal and store them.

4Press the m/M buttons to select and press the OK button.

Return to the menu screen.

xAdjust the picture’s sharpness manually(PHASE/PITCH)

You can adjust the picture’s sharpness as follows.

1	Set the resolution to 1280 ⋅ 1024 on the computer.
2	Load the CD-ROM.
3	Start the CD-ROM, select the region and model, and
	display the test pattern.
	For Windows
	Click [Utility] t [Windows]/[Win Utility.exe].
	For Macintosh
	Click [Utility] t [Mac]/[Mac Utility].
4	Press the MENU button.
	The main menu appears on the screen.
5	Press the m/M buttons to select	(SCREEN) and
	press the OK button.
	The SCREEN menu appears on the screen.
6	Press the m/M buttons to select PHASE and press
	the OK button.
	The PHASE menu appears on the screen.
7	Press the m/M buttons until the horizontal stripes
			GB
	are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

8Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust pitch by the following steps.

9Press the m/M buttons to select PITCH and press the

OK button.

The PITCH menu appears on the screen.

10Press the m/M buttons until the vertical stripes disappear.

Adjust so that the vertical stripes disappear.

11Click [END] on the screen to turn off the test pattern.

13