Setup 2:Connect the video signal cables

•Turn off the monitor and computer before connecting.

•When connecting the computer to the monitor’s HD15 input connector (analog RGB), refer to “Connect a computer equipped with an HD15 output connector (analog RGB).” (page 7)

Notes

•Do not touch the pins of the video signal cable connector as this might bend the pins.

•Check the alignment of the HD15 connector to avoid bending the pins of the video signal cable connector.

1Slide up the back cover.

2Tilt the display forward.

back cover

Connect a computer equipped with an HD15 output connector (analog RGB)

Using the supplied HD15-HD15 video signal cable (analog RGB), connect the computer to the monitor’s HD 15 input connector (analog RGB).

Connect the computer according to the following illustrations.

xConnecting to an IBM PC/AT or compatible computer

to the HD 15 input connector (analog RGB)

to the computer’s HD15 output connector (analog RGB)

IBM PC/AT or

HD15-HD15 video signal

 

cable (analog RGB)

GB

compatible computer

(supplied)

 

xConnecting to a Macintosh computer

to the HD 15 input connector (analog RGB)

Connect a computer equipped with a DVI output connector (digital RGB) (SDM-S74E only)

Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor’s DVI-D input connector (digital RGB).

to the DVI-D input connector (digital RGB)

to the computer’s DVI output connector (digital RGB)

DVI-D video signal cable (digital RGB) (supplied)

to the computer’s

HD15-HD15 video

signal cable (analog

HD15 output connector

RGB) (supplied)

(analog RGB)

 

Macintosh computer

 

When connecting a Macintosh computer, use an adapter (not supplied), if necessary. Connect the adapter to the computer before connecting the video signal cable.

7