Sony SLV-ED815PS Audio dubbing SLV-ED818ME/SG and ED616ME/MJ/ SG only, To stop while editing

Audio dubbing (SLV-ED818ME/SG and ED616ME/MJ/ SG only)

This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recorded with a camcorder.

Before you start editing

•Turn on your TV and set it to the video channel.

•Press INPUT SELECT or PROG +/– to display “L1” or “L2” in the display window.

CLEAR

AUDIO DUB

1 2 3

4 5 6

7 8 9

PAUSE

1 Insert a source tape into the stereo system (or the playback VCR). Search for the point to start playback and set it to playback pause.

2 Insert a prerecorded tape into this (recording) VCR. Search for the end of the section to be replaced and press X PAUSE.

Make sure that the tape has its safety tab in place.

3

4

5

Press CLEAR to reset the counter to “0:00:00.”

Rewind the prerecorded tape to the beginning of the section to be replaced.

The VCR pauses.

Press AUDIO DUB.

The indicator appears in the display window.

6 To start editing, press the X PAUSE buttons on this VCR and the stereo system (or other VCR) at the same time.

When the counter reaches “0:00:00”, audio dubbing stops automatically.

To stop while editing

Press the x STOP buttons on this VCR and the stereo system (or other VCR).

To listen to both the hi-fi and normal audio (for SLV-ED818ME/SG only)

Set AUDIO MIX to ON in the SET UP MENU (page 48). Use this feature to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is set to ON, the AUDIO MONITOR button does not function. Remember to reset AUDIO MIX to OFF after playing the tape.

52

Editing