Sony SLV-ED915PS, SLV-ED817TH Setting up the remote commander, Inserting the batteries

Step 2

Setting up the remote commander

Inserting the batteries

Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down until the positive

(+) end clicks into position.

Using the remote commander

You can use this remote	Remote sensor
commander to operate this
VCR and a Sony TV. Buttons
on the remote commander
marked with a dot (•) can be
used to operate your Sony TV.
If the TV does not have the g
symbol near the remote sensor,
this remote commander will
not operate the TV.

TV/VIDEO

Getting Started

To operate	Set TV/VIDEO to
the VCR	VIDEO and point at the remote sensor on the VCR
a Sony TV	TV/ and point at the remote sensor on the TV

Notes

•The TV/VIDEO button selects the TV’s input source (either aerial in or line in). The button does not control this VCR.

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

Getting Started 5