Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip this step.
1/u ON/STANDBY
|
|
| RF CHANNEL PROGRAM +/– | |
|
|
|
|
|
1 ON/STANDBY | Press 1/u ON/STANDBY to turn on the VCR. | |||
|
|
|
|
|
|
|
|
|
|
2 |
|
| Press RF CHANNEL on the VCR. | |
|
|
| The | |
|
|
| ||
RF CHANNEL | about three seconds. | |||
|
|
| Press RF CHANNEL again while the RF channel is flashing. | |
|
|
| The VCR signal is output through this channel to the TV. | |
|
|
|
|
|
|
|
|
| SP |
|
|
|
| APC |
|
|
|
|
|
|
|
|
|
|
3 | PROGRAM | Press PROGRAM +/– to select the suitable RF channel, depending | ||
– | + | |||
|
|
|
| on the area you live in. |
|
|
|
| You can select Australia channels from 28 AUS to 69 AUS or New |
|
|
|
| Zealand channels from 28 NZ to 69 NZ. |
|
|
|
| The Australia and New Zealand channels appear in the display |
|
|
|
| window in alternate sequence. |
|
|
|
|
|
4 |
|
|
| Turn on your TV and select a programme position for the VCR |
|
|
|
| picture. |
This channel will now be referred to as the video channel.
Some TV has the programme position, such as 0, that is reserved for a VCR. In this case, select that programme position for the VCR picture. Refer to the instruction manual of your TV for details.
10Getting Started