Troubleshooting (continued)

Recording

Symptom

Remedy

No TV programmes

• Make sure the TV is set to the video channel. If you are

appear on the TV screen.

using a monitor, set it to video input.

 

• Select the correct source with the INPUT SELECT or

 

PROG +/– buttons. Select a programme position when

 

recording TV programmes; select “L” when recording

 

from other equipment.

 

 

TV reception is poor.

• Adjust the TV aerial.

 

• Make sure COUNTRY in the TUNER PRESET menu is

 

set to the country you live in.

 

 

The tape starts playing as soon

• The safety tab has been removed. To record on this

as it is inserted.

tape, cover the tab hole.

 

 

The tape is ejected when you

• Check that the safety tab has not been removed.

press zREC.

 

 

 

 

Nothing happens

• Make sure the tape is not at its end.

 

when you press zREC.

 

 

 

 

 

 

 

 

 

 

 

 

 

The timer does not operate.

• Check that the clock is set.

 

 

• Make sure a tape has been inserted.

recording

 

• Check that the safety tab has not been removed.

 

• Make sure the tape is not at its end.

 

 

 

 

• Make sure a programme has been set for timer

 

 

recording.

Timer

 

• Make sure your timer settings are past the current

 

time.

 

• Check that the satellite tuner is turned on.

 

 

• The clock stops if the VCR is disconnected from the

 

 

mains for more than eight hours. Reset the clock and

 

 

timer.

 

 

 

 

 

 

 

 

A tape cannot be inserted.

• Check that a tape is not already in the tape

 

 

compartment.

 

 

 

 

 

 

 

 

The remote commander does

• Make sure you are pointing the remote commander at

 

not function.

the remote sensor on the VCR.

 

 

• Replace all the batteries in the remote commander with

 

 

new ones if they are weak.

 

 

• Make sure the

 

/

 

remote control switch is

 

 

TV

VIDEO

Others

 

set correctly.

 

 

 

 

 

 

(SLV-EZ44AZ/EZ22AZ only)

01 when you replace the batteries of the remote

 

You cannot control other TVs.

• Set your TV’s code number. The code number resets to

 

 

commander.

 

 

 

 

 

 

 

 

The tracking meter does not

• The recording condition of the tape is very poor and

 

appear on the screen.

tracking cannot be adjusted.

 

 

 

 

 

 

 

 

The VCR needs to be cleaned.

• Clean the cabinet, panel and controls with a dry, soft

 

 

cloth, or a soft cloth slightly moistened with a mild

 

 

detergent solution. Do not use any type of solvent,

 

 

such as alcohol or benzine.

 

 

 

 

 

 

 

60 Additional Information