Presetting channels

(For SLV-EZ44AZ/EZ22AZ only)

If you can receive no channels or only a few channels after performing the EASY G-CODE SET UP function (page 14), preset all receivable channels automatically using the One Touch Tuning function or the TUNER PRESET menu.

If some channels could not be preset automatically when using the EASY G-CODE SET UP function, One Touch Tuning function or TUNER PRESET menu, preset them manually; if there are any unwanted channels among the preset ones, you can disable the channels.

(For SLV-EZ11AZ only)

First, we recommend that you preset the receivable channels in your area using the One Touch Tuning function or the AUTO PRESET in the TUNER PRESET menu. Then, if some channels could not be preset automatically, set them manually; if there are any unwanted channels among the preset ones, you can disable the channels.

Presetting all receivable channels using the One Touch Tuning function

PROGRAM +/–

ONE TOUCH

TUNING

1ONE TOUCH

TUNING

Press and hold ONE TOUCH TUNING on the VCR for more than three seconds.

2PROGRAM

–+

ONE TOUCH

TUNING

1Press PROGRAM +/– on the VCR so that the indicator for your country (AUS or NZ) appears in the display window.

SP

APC

2Press ONE TOUCH TUNING.

The VCR starts presetting the channels.

SP

APC

The WAIT indicator goes off when all the receivable channels are preset.

16Getting Started