Recording TV programmes (continued)

To save a recording

To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape.

Safety tab

Tips

•To select a programme position, you can use the programme number buttons on the remote commander. For two-digit numbers, press the ?(ten’s digit) button followed by the programme number buttons.

•You can select a video source from the LINE-1 IN jacks using INPUT SELECT or PROG +/– .

•The display appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape.

•If you do not want to watch TV while recording, you can turn off the TV.

Notes

•The display does not appear during still (pause) mode or slow-motion playback.

•It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY.

•The remaining tape length does not appear while playing in NTSC system.

36Basic Operations