Step 4

Tuning your TV to the VCR

If you have connected your VCR to the TV using the audio/video cable, skip this step.

1/u ON/STANDBY

 

 

 

RF CHANNEL PROGRAM +/–

 

 

 

 

1

ON/STANDBY

Press 1/u ON/STANDBY to turn on the VCR.

 

 

 

 

 

 

 

 

2

 

 

Press RF CHANNEL on the VCR.

The factory-preset RF channel flashes in the display window for

RF CHANNEL about three seconds (RF32 for SLV-EZ77NZ, RF36 for SLV-EZ77AS and 36 AUS for SLV-EZ66AZ).

Press RF CHANNEL again while the RF channel is flashing.

The VCR signal is output through this channel to the TV.

Started Getting

SP

APC

3PROGRAM

–+

(For SLV-EZ66AZ only)

 

 

 

 

Press PROGRAM +/– to select the suitable RF channel, depending

 

 

 

 

on the area you live in.

 

 

 

 

 

 

 

 

You can select Australia channels from 28 AUS to 69 AUS or New

 

 

 

 

Zealand channels from 28 NZ to 69 NZ.

 

 

 

 

The Australia and New Zealand channels appear in the display

 

 

 

 

window in alternate sequence.

 

 

 

 

 

4

 

 

 

Turn on your TV and select a programme position for the VCR

 

 

 

 

picture.

This channel will now be referred to as the video channel.

Some TV has the programme position, such as 0, that is reserved for a VCR. In this case, select that programme position for the VCR picture. Refer to the instruction manual of your TV for details.

continued Getting Started 11