Presetting channels

If you can receive no channels or only a few channels after performing the EASY G-CODE SET UP function (page 15), preset all receivable channels automatically using the One Touch Tuning function or the TUNER PRESET menu.

If some channels could not be preset automatically when using the EASY G-CODE SET UP function, One Touch Tuning function or TUNER PRESET menu, preset them manually; if there are any unwanted channels among the preset ones, you can disable the channels.

Presetting all receivable

PROGRAM +/–

channels using the One

 

Touch Tuning function

 

 

 

 

ONE TOUCH

 

 

 

TUNING

1

ONE TOUCH

Press and hold ONE TOUCH TUNING on the VCR for more than

TUNING

three seconds.

Started Getting

2PROGRAM

–+

ONE TOUCH

TUNING

(For SLV-EZ66AZ only)

1Press PROGRAM +/– on the VCR so that the indicator for your country (AUS or NZ) appears in the display window.

SP

APC

2Press ONE TOUCH TUNING.

The VCR starts presetting the channels.

SP

APC

The WAIT indicator goes off when all the receivable channels are preset.

To check if the channels are preset correctly

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the channels are preset correctly.

Tip

•To stop the One Touch Tuning function, press ONE TOUCH TUNING or p STOP

on the VCR during the setting.

 

continued

 

Getting Started

 

17