Step 2: Setting up the remote commander (continued)
You can use the WIDE button after entering a code number with any of the following marks;
*1: Press WIDE to switch the wide picture mode on or off.
*2: Press WIDE, then press VOL +/– to select the wide picture mode you want.
*3: Press WIDE. The menu appears on the TV screen. Then, press M/m/</
,to select the wide picture you want and press OK.
Notes
•If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander.
•You may not be able to use some buttons to control
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote commander, the code number may automatically reset to 01 (Sony). If your TV is not a Sony, it is recommended to manually set the appropriate code number every time you replace the batteries.
•If you set your TV’s code number correctly while the TV is turned on, the TV turns off automatically.
8Getting Started