Presetting channels (continued)

Disabling unwanted programme positions

After presetting channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. You can also disable unwanted programme positions using the SET UP CH AND G-CODE menu (page 28).

1Press MENU, then press M/m to move the cursor (B) to TUNER PRESET and press OK.

2Press PROG +/– to select the programme position you want to skip.

3Press M/m/</, to move the cursor (B) to ADD/ERASE, then select

ERASE.

4Press OK.

If the picture is not clear

Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture is not clear, you may also use the manual tuning function.

1Press PROG +/– to select the programme number for which you cannot obtain a clear picture.

2

3

Press MENU, then select TUNER PRESET and press OK.

Select FINE TUNING.

The fine tuning meter appears.

e.g. SLV-EZ77AS

 

 

TUNER PRESET

 

PROG14

Selected programme position

NORMAL / CATV

• NORM

CATV

 

AUTO PRESET

 

 

 

CHANNEL SET

35

 

 

ADD / ERASE

• ADD

ERASE

 

AFT

 

• ON

OFF

 

FINE TUNING

 

 

 

SET

: [ ]

 

 

 

4Press </, to get a clearer picture, then press OK.

Note that the AFT (Auto Fine Tuning) setting switches to OFF.

Notes

•The menu disappears automatically if you do not proceed for more than a few minutes.

•The channel numbers besides CHANNEL SET may not be the same as those in your area. This is because this VCR’s channel search system is based on the fixed TV system that has the widest channel coverage. If necessary, apply your local channel numbers to the programme positions (see “Changing programme positions” on page 26).

22Getting Started