Step 4: Tuning your TV to the VCR (continued)
5 |
| Tune the TV to the same channel as that |
|
|
|
| |||
|
| shown in the display window so that | SONY VIDEO CASSETTE |
|
|
| RECORDER |
| |
|
| the picture on the right appears on the |
|
|
|
| TV screen. |
|
|
|
| Refer to your TV manual for tuning |
|
|
|
| instructions. |
|
|
|
| If the picture does not appear clearly, |
|
|
|
| see “To obtain a clear picture from the |
|
|
|
| VCR” below. |
|
|
|
|
|
|
|
6 |
| Press RF CHANNEL. |
|
|
|
| You have now tuned your TV to the VCR. From now on, whenever |
| |
|
|
| ||
RF CHANNEL | you want to play a tape, set the TV to the video channel. |
| |
|
|
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 5 above, press PROGRAM +/– in step 5, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.
To set another RF channel number on the VCR, select a channel number that does not receive a broadcast signal in your area and is clear of interference from other channels.
If you cannot obtain a clear picture after performing this procedure, we recommend you connect the VCR and TV using an audio/video cable (see “To a TV that has audio/video input jacks” on pages 9 and 10). If the same symptom persists, consult your nearest Sony dealer.
12Getting Started