Step 3
Connecting the VCR
Connect the aerial to your VCR and TV as shown below to watch TV programmes and VCR pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better picture and sound.
Connecting the aerial
|
| AERIAL IN |
|
| AERIAL OUT |
| Mains lead |
|
to mains |
| AERIAL IN |
|
| |
| : Signal flow | Aerial cable (supplied) |
|
|
Started Getting
1 | Disconnect the aerial cable from your TV |
| and connect it to AERIAL IN on the rear |
| panel of the VCR. |
AERIAL IN
OUT
2 | AERIAL |
Connect AERIAL OUT of the VCR and the IN | |
| aerial input of your TV using the supplied |
| OUT |
| aerial cable. |
3 | Connect the mains lead to the mains. |
Additional connections
To a TV that has audio/video input jacks
This additional connection improves picture and sound quality. Connect the TV as shown on the right.
e.g.
LINE IN
If you want to use the Trinitron TV Synchro Play function (see page 33), this connection is necessary. (If your TV has two or more inputs, connect the audio/video cable to the VIDEO IN 1 jacks.)
Audio/video cable (not supplied)
continued
Getting Started
9