Notes

•The TV/VIDEO button selects an input source of the TV from either aerial in or line in. The button does not control this VCR.

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one.

•Do not use different types of batteries.

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is listed in the table below, set the appropriate manufacturer’s code number.

1Set TV / VIDEO at the top of the remote commander to TV .

2Hold down ?/1, and enter your TV’s code number(s) using the programme number buttons. Then release ?/1.

Now you can use the ?/1, VOL +/–, PROG +/–, programme number buttons, ? (ten’s digit) and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot (•) to control a Sony TV. To control the VCR, reset TV / VIDEO to VIDEO .

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Started Getting

Manufacturer

Code number

Sony

01*1,02

 

 

Akai

68

 

 

Blaupunkt

10

 

 

Ferguson

52

 

 

Grundig

11*1

 

 

Hitachi

24

 

 

ITT/Nokia

15,16,69*3

 

 

JVC

33*

 

 

Loewe

45

 

 

Mivar

09, 70

 

 

NEC

66

 

 

Panasonic

17*1,49

 

 

Manufacturer

Code number

Philips

06*1,07*1,08*1

Saba

12,13

Samsung

22,23

Sanyo

25

Sharp

29

Telefunken

36

Thomson

43*2

Toshiba

38

continued

Getting Started

7